Answer
Nov 04, 2024 - 07:23 PM
To install the Xerox XDM6480 Duplex Document Scanner, please follow the steps below:
1. Unpack the scanner: Remove the scanner from its packaging and ensure that all the included accessories are present.
2. Connect the scanner to your computer: Use the provided USB cable to connect the scanner to an available USB port on your computer. Make sure the connection is secure.
3. Power on the scanner: Connect the scanner to a power source using the included power adapter. Press the power button on the scanner to turn it on.
4. Install the scanner software: Insert the included software CD into your computer's CD/DVD drive. Follow the on-screen instructions to install the scanner software. If your computer doesn't have a CD/DVD drive, you can download the software from the manufacturer's website.
5. Configure scanner settings: Once the software installation is complete, launch the scanning software on your computer. Follow the software's setup wizard to configure the scanner settings, such as resolution, file format, and destination folder for scanned documents.
6. Calibrate the scanner (if required): Some scanners may require calibration to ensure accurate scanning. Refer to the user guide for instructions on how to calibrate the Xerox XDM6480 scanner, if necessary.
7. Start scanning: With the scanner properly installed and configured, you can now start scanning documents. Place the document you want to scan into the scanner's document feeder or flatbed, depending on the type of document. Use the scanning software on your computer to initiate the scanning process and adjust any desired settings.
For more detailed instructions and troubleshooting information, please refer to the User Guide provided with the scanner.
Add New Comment