Answer
Nov 04, 2024 - 02:45 AM
Setting up the Xerox DocuMate 6710 Duplex Production Scanner is a straightforward process. Here are the step-by-step instructions:
1. Unbox the scanner: Start by unpacking the scanner from its packaging. Make sure to remove any protective materials or tapes.
2. Connect the scanner to power: Plug the power cord into the scanner and connect the other end to a power outlet.
3. Connect the scanner to your computer: Use the provided USB cable to connect the scanner to your computer. Plug one end of the USB cable into the USB port on the scanner and the other end into a USB port on your computer.
4. Install the scanner drivers: Insert the included installation disc into your computer's CD/DVD drive. Follow the on-screen instructions to install the necessary drivers and software for the scanner. If your computer does not have a CD/DVD drive, you can download the drivers and software from the Xerox website.
5. Configure scanner settings: Once the drivers and software are installed, open the scanning software on your computer. Follow the prompts to configure the scanner settings, such as resolution, file format, and destination folder for scanned documents. Refer to the user guide for detailed instructions on configuring the scanner settings.
6. Test the scanner: Place a document in the automatic document feeder (ADF) of the scanner. Press the scan button on the scanning software or on the scanner itself to initiate a test scan. Verify that the scanned document appears correctly on your computer.
7. Start scanning: With the scanner set up and tested, you can now start scanning your documents. Place the documents in the ADF and initiate the scanning process through the scanning software or the scanner's control panel.
For more detailed instructions and troubleshooting tips, refer to the Xerox DocuMate 6710 Duplex Production Scanner User Guide provided with the product.
Add New Comment