User Manual Q&AAnswer
Nov 04, 2024 - 02:42 AM
To pair the receiver and door sensor for the Secrui M508+D017 Wireless Door Sensor Chime, please follow these steps:
1. Make sure the receiver is plugged into a power outlet.
2. Press and hold the CD button on the receiver for a long press (more than 3 seconds). The receiver will emit a beep sound once.
3. Move the door sensor (the part with the magnetic strip) closer to the receiver. The receiver will emit two beeps.
4. Move the door sensor away from the receiver and then bring it back close again. The receiver will emit one beep.
5. Press the CD button on the receiver for a short press.
6. The music will start ringing, indicating that the pairing process is successful.
Note: If you want to add a second door sensor or more, you can follow the same steps mentioned above.
If you need further assistance or encounter any issues during the pairing process, please refer to the Secrui M508+D017 Wireless Door Sensor Chime User Manual for more detailed instructions.
Add New Comment