Answer
Nov 04, 2024 - 01:20 AM
To install the Plustek OpticBook A300 Plus scanner, please follow these steps:
1. Verify that you have all the proper components included in the box. Refer to the "Box Contents" section of the user's guide to ensure that all parts are included.
2. Make sure your computer meets the minimum system requirements. The scanner requires a PC with an Intel Core i5 processor or compatible, 4GB RAM, an available USB 2.0 port, a DVD-ROM drive, and 800 MB of free hard disk space. The operating system should be Windows 7, 8, or 10.
3. Unlock the scanner by sliding the locking switch on the scanner's underside towards the back panel of the scanner until it snaps into place.
4. Connect the scanner to your computer. Plug the AC adapter into the scanner's power receptor and the other end into a standard AC power outlet. Plug the square end of the USB cable into the USB port at the rear of the scanner and the rectangular end into an available USB port on your computer. If you are using a USB hub, connect the hub to the USB port on your computer and then connect the scanner to the hub.
5. Switch on the scanner power from the side of the scanner.
6. If the USB components on your computer are functioning correctly, the "Add New Hardware Wizard" or "Found New Hardware Wizard" should be launched automatically. Follow the on-screen instructions to install the scanner's software. If the wizard does not appear, insert the Setup/Application DVD-ROM included with your scanner into your DVD-ROM drive and run the install.exe file. Follow the instructions in the installation message.
7. After the software is installed, close all open applications and restart your computer.
8. Test the scanner by placing a book or document on the scanner glass, aligning it with the mark on the scanner, and pressing the Color, Grayscale, or Text Scan button on the scanner panel. The scanner should start scanning immediately and perform the corresponding action according to the settings you have set up in the Book Pavilion window.
If you encounter any issues during the installation process, refer to the troubleshooting section in the user's guide or contact the Plustek customer service for further assistance.
Add New Comment