Answer
Nov 04, 2024 - 12:44 AM
To connect the Tera HW0008 QR Barcode Scanner to your computer, follow these steps:
1. Determine the type of connection you want to use: The Tera HW0008 scanner supports both 2.4G wireless and USB wired connections. Choose the connection method that suits your needs.
2. For 2.4G wireless connection:
a. Insert the USB receiver into an available USB port on your computer.
b. Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
c. Press the pairing button on the scanner (located on the bottom or side) to enter pairing mode.
d. Within 10 seconds, press the pairing button on the USB receiver to establish a connection with the scanner. The LED indicator on both the scanner and receiver should blink to indicate successful pairing.
3. For USB wired connection:
a. Connect one end of the USB cable to the scanner and the other end to an available USB port on your computer.
b. The scanner should be automatically recognized by your computer and ready to use.
4. Once the scanner is connected to your computer, refer to the user manual for instructions on how to configure the scanner settings, such as scanning modes and output formats.
Please note that the specific steps may vary slightly depending on the model and version of the Tera HW0008 QR Barcode Scanner. For more detailed instructions and troubleshooting tips, refer to the user manual provided with the product.
Add New Comment