Answer
Nov 04, 2024 - 12:06 AM
To connect the Wolverine F2D Saturn Converter to your computer, follow these steps:
1. Insert an SD memory card into the converter if you are not using the internal memory.
2. Use the included USB cable to connect the converter to your computer. Plug one end of the USB cable into the USB port on the converter and the other end into a USB port on your computer.
3. Power on the F2D Saturn Converter.
4. Use the left or right arrow keys on the converter to highlight the "USB UPLOAD" mode.
5. Press the OK/Enter key to activate the USB mode.
6. On your computer, if you are using a Windows PC, a Microsoft Wizard Window will pop out. Follow the steps to copy the picture files to your PC. If you are using a Mac system, iPHOTO will pop out. If not, launch iPHOTO and import the files.
7. All converted image files will be named in alphanumeric order (e.g., IMAG0001.JPG, IMAG0002.JPG) and stored under the directory of DCIM/100MEDIA.
8. After the files have been copied to your computer, you can delete the files in the memory card or internal memory using the delete functions on the computer or the "Delete All" function on the converter.
Note: It is recommended to download the files to different folders each time for better organization.
For further assistance or troubleshooting, you can contact Wolverine Data's technical support staff at support@wolverinedata.com or visit their website at www.wolverinedata.com/support.
Add New Comment