Answer
Nov 04, 2024 - 12:04 AM
To connect the Tera 5100 Wireless 1D Laser Barcode Scanner to your device, please follow these steps:
1. Ensure that the scanner is charged or has a fully charged battery.
2. Determine the connectivity option you want to use: Bluetooth or 2.4GHz wireless.
3. For Bluetooth connectivity:
a. Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
b. Enable Bluetooth on your device (e.g., laptop) and ensure it is discoverable.
c. On the scanner, press and hold the Bluetooth pairing button until the LED indicator starts flashing.
d. On your device, search for available Bluetooth devices and select the Tera 5100 scanner from the list.
e. Follow any additional on-screen prompts to complete the pairing process.
4. For 2.4GHz wireless connectivity:
a. Connect the USB receiver to your device's USB port.
b. Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
c. The scanner should automatically pair with the USB receiver. If not, press the pairing button on the receiver and then press the pairing button on the scanner.
d. Wait for the LED indicator on the scanner and receiver to stabilize, indicating a successful connection.
Once the connection is established, the scanner should be ready for use. Refer to the user manual for more detailed instructions and troubleshooting tips.
Note: The specific steps may vary slightly depending on the model and firmware version of the Tera 5100 Wireless 1D Laser Barcode Scanner. Please consult the user manual provided for your specific scanner model for accurate instructions.
Add New Comment