Answer
Nov 03, 2024 - 11:51 PM
To connect the Tera EV-P01-WT Portable EV Charger to your electric vehicle, please follow these steps:
1. Plug the charger into a power outlet: Ensure that the charger is plugged into a properly grounded power outlet. The power outlet should have a capacity greater than the maximum operating power of the charger.
2. Prepare the charging seat: Open the charging seat and check for any foreign matter or debris. Make sure the charging seat is clean and free from obstructions.
3. Connect the charging gun to the electric vehicle: Hold the charging gun and insert the connector into the electric vehicle's charging port. Ensure that the connector is securely inserted and locked into place.
4. Start charging: Once the charging gun is properly connected to the electric vehicle, the charging process should begin automatically. The charger's indicator lights will display the charging status.
5. Stop charging and disconnect: When you're ready to stop charging, simply remove the charging gun from the electric vehicle's charging port. Make sure to handle the charging gun carefully and avoid touching the exposed wires.
Please refer to the Tera EV-P01-WT Portable EV Charger User Manual for more detailed instructions and safety precautions.
Add New Comment