Answer
Nov 03, 2024 - 11:50 PM
To connect the Tera 1300 Wireless Barcode Scanner to your device, please follow these steps:
1. Ensure that the scanner is charged or connected to a power source if you are using the corded electric option.
2. Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
3. Depending on your device, choose the appropriate connectivity option:
- For Bluetooth connection: Enable Bluetooth on your device and put it in pairing mode. On the scanner, press and hold the Bluetooth button until the LED indicator starts flashing. Select the scanner from the list of available devices on your device's Bluetooth settings and follow any additional prompts to complete the pairing process.
- For 2.4G wireless connection: Plug the USB receiver into an available USB port on your device. The scanner should automatically connect to the receiver.
- For USB wired connection: Connect one end of the USB cable to the scanner and the other end to a USB port on your device. The scanner should be recognized and ready to use.
4. Once the scanner is successfully connected to your device, you can start scanning barcodes by aiming the scanner's laser at the barcode and pressing the trigger button.
For more detailed instructions and troubleshooting tips, please refer to the User Manual provided with the product.
Add New Comment