How do I install the Binelucolu Air Compressor Pump Head? (Binelucolu Air Compressor Pump Head User Manual)

Answer

manuals.plus

Nov 03, 2024 - 11:47 PM

Installing the Binelucolu Air Compressor Pump Head is a relatively straightforward process. Here are the step-by-step instructions:

1. Ensure proper alignment: When placing the pump head, make sure the motor pulley and the belt pulley are in the same straight line. The more aligned they are, the less vibration you'll experience.

2. Tighten screws: Before installation, tighten all screws, including the base and pulley screws, to ensure a secure fit.

3. Belt installation: After installing the screws, tighten the belt. If the belt is loose, move the motor to adjust the tension. Once the belt is properly tightened, reinstall the screws.

4. Motor speed and wheel diameter: Depending on the motor speed, adjust the motor wheel diameter accordingly. If the motor speed is 2880 rpm, the motor wheel diameter should be 3.9". If the motor speed is 1440 rpm, the motor wheel diameter should be 7.87".

5. Oil filling: Before starting the new machine, it must be filled with oil. Add oil to the center of the red point on the oil mirror.

6. Check rotation direction: The rotation direction of the pump head should be clockwise. If it is reversed, adjust it promptly to ensure proper operation.

7. Oil change and air filter replacement: It is recommended to change the oil in the pump head within the first half month, then every one and a half months, and subsequently every two to three months. Additionally, regularly replace the air filter. Under normal circumstances, the air filter should be replaced within two to three months.

By following these installation instructions and performing regular maintenance, you can ensure optimal performance and longevity of your Binelucolu Air Compressor Pump Head. For any further questions or concerns, refer to the user manual or contact the manufacturer for assistance.