User Manual Q&AAnswer
Nov 03, 2024 - 11:22 PM
To power on the Tera W90C Portable Pet Microchip Scanner, follow these steps:
1. Locate the designated power button or switch on the scanner. It is usually located on the side or top of the device.
2. Press and hold the power button or switch for a few seconds until the scanner powers on. You may see a light or indicator on the scanner to confirm that it is turned on.
3. Once the scanner is powered on, it is ready to be used for scanning microchips on pets.
Note: If the scanner does not power on, check the battery charge and connections. Ensure that the battery is properly inserted and charged. If the issue persists, refer to the troubleshooting section in the user manual or contact customer support for further assistance.
Please refer to the Tera W90C Portable Pet Microchip Scanner user manual for more detailed instructions and illustrations.
Add New Comment