Answer
Nov 03, 2024 - 11:13 PM
To power on and use the Tera H01 Pet Microchip Reader Scanner, please follow these steps:
1. Before the first use, make sure to charge the built-in rechargeable battery for 2 hours using the provided USB cable.
2. Once the battery is charged, hold down the button on the scanner for 3 seconds to power it on. The screen will display a startup sign.
3. Hold the scanner over the location of the microchip on the pet. If no tags are detected within 20 seconds, the screen will display "No Tag."
4. If the scanner detects a tag, it will display the identification number on the screen.
5. Press the button once to continue scanning for more tags.
6. To check the scanned data, press the button twice while the screen shows the read sign.
7. If there are no further inputs, the scanned data will remain displayed for 5 seconds, and the scanner will automatically turn off after 60 seconds of inactivity.
Remember to refer to the user guide for additional information on maintenance, troubleshooting, and other features of the Tera H01 Pet Microchip Reader Scanner.
Add New Comment