Answer
Nov 03, 2024 - 11:05 PM
To connect the Tera 9600 Wireless Omnidirectional Barcode Scanner to your computer, you have two options: wireless 2.4G connectivity and USB wired connection. Here's how to set up each connection method:
1. Wireless 2.4G Connectivity:
- Plug the USB receiver into an available USB port on your computer.
- Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
- Press the pairing button on the USB receiver within 10 seconds of turning on the scanner.
- The LED indicator on the scanner will blink rapidly to indicate it is searching for the receiver.
- Once the scanner and receiver are successfully paired, the LED indicator on the scanner will stop blinking and remain solid.
2. USB Wired Connection:
- Connect one end of the USB cable to the USB port on your computer.
- Connect the other end of the USB cable to the USB port on the scanner.
- The scanner will automatically power on and establish a connection with your computer.
For more detailed instructions and troubleshooting steps, please refer to the user manual provided with the product. You can find the complete user manual for the Tera 9600 Wireless Omnidirectional Barcode Scanner [here](https://manuals.plus/wp-content/uploa...).
Add New Comment