User Manual Q&AAnswer
Nov 03, 2024 - 10:56 PM
To set up the Namcim HDMI Display Dongle, follow these steps:
1. Connect the dongle to your TV or projector's HDMI port: Locate the HDMI port on your TV or projector and plug one end of the HDMI cable (included with the dongle) into the HDMI port on the dongle. Then, plug the other end of the HDMI cable into the HDMI port on your TV or projector.
2. Connect the dongle to a power source: Use the provided USB power cable to connect the dongle to a USB power source, such as a USB port on your TV, a USB power adapter, or a power bank.
3. Select the appropriate HDMI input on your TV or projector: Use your TV or projector's remote control to select the HDMI input that corresponds to the port where you connected the dongle. This will display the dongle's interface on your TV or projector.
4. Set up screen mirroring or casting on your device: Depending on your device, the steps to enable screen mirroring or casting may vary. Generally, you'll need to go to your device's settings, look for a "Screen Mirroring" or "Cast" option, and select the Namcim HDMI Display Dongle as the target device. Consult your device's user manual or online support resources for specific instructions.
5. Start streaming content: Once your device is connected to the dongle, you can start streaming content from your device to the larger screen. This can include videos, photos, presentations, apps, and games. Simply open the content you want to stream on your device, and it will be mirrored or cast to the TV or projector.
Note: Both your device and the dongle need to be connected to the same Wi-Fi network for screen mirroring or casting to work. Make sure your Wi-Fi is enabled and connected on both devices before attempting to set up the dongle.
For more detailed instructions and troubleshooting tips, refer to the user manual that came with the Namcim HDMI Display Dongle.
Add New Comment