User Manual Q&AAnswer
Nov 03, 2024 - 10:42 PM
To set up the Krevi ou-us2-19488 Dual Band WiFi Repeater, follow these steps:
1. Find an optimal location: Choose a location for the repeater that is within range of your existing Wi-Fi router and close to the areas with weak signal. Avoid placing the repeater near interference sources like large metal objects or other electronic devices that could disrupt the Wi-Fi signal.
2. Power on the repeater: Connect the repeater to a stable power source using the provided power adapter. Avoid using extension cords or power outlets that are prone to power fluctuations.
3. Connect to the repeater: On your computer or mobile device, search for available Wi-Fi networks and look for the network name (SSID) of the repeater. It is usually named something like "Krevi ou-us2-19488" or similar. Connect to this network.
4. Access the configuration interface: Open a web browser on your connected device and enter the default IP address of the repeater in the address bar. The default IP address is often "192.168.188.1". Press Enter to access the configuration interface.
5. Log in to the repeater: Enter the default username and password for the repeater. The default credentials are usually provided in the user manual. If you can't find them, try using "admin" for both the username and password.
6. Configure the repeater: Once logged in, you will be presented with the repeater's configuration interface. Follow the on-screen instructions to set up the repeater with your existing Wi-Fi network. This may involve selecting your Wi-Fi network from a list, entering the Wi-Fi password, and choosing the desired network settings.
7. Apply the settings: After configuring the repeater, click on the "Apply" or "Save" button to save the settings and apply them to the repeater.
8. Test the connection: Once the settings are applied, the repeater will restart and establish a connection with your existing Wi-Fi network. Test the connection by moving to an area with weak signal and check if the Wi-Fi signal has improved.
Note: The specific steps and options may vary slightly depending on the exact model and firmware version of the Krevi ou-us2-19488 Dual Band WiFi Repeater. It is recommended to refer to the user manual or documentation provided with the device for detailed instructions specific to your model.
Add New Comment