User Manual Q&AAnswer
Nov 03, 2024 - 09:56 PM
To switch between wireless and wired mode on the Tera D5100 Barcode Scanner, please follow the steps below:
1. Wireless Mode:
- Ensure that the scanner is charged or has a sufficient battery level.
- Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
- On your computer or device, enable Bluetooth and search for available devices.
- Select the Tera D5100 scanner from the list of available devices.
- Once connected, the scanner is now in wireless mode and ready to scan barcodes.
2. Wired Mode:
- Connect one end of the USB cable to the scanner's USB port.
- Connect the other end of the USB cable to a USB port on your computer or device.
- The scanner will automatically switch to wired mode once the USB connection is established.
- You can now start scanning barcodes using the wired connection.
Please refer to the user manual provided with the scanner for more detailed instructions and troubleshooting tips.
Add New Comment