Answer
Nov 03, 2024 - 09:54 PM
To install the ribbon cassette in the Tera Electronic Time Clock, please follow these steps:
1. Press the [4] button on the time clock.
2. Switch the latch to the ON position.
3. Remove the cover of the time clock.
4. Remove the protective film on the installed ribbon cassette.
5. Pull A and B backward and hold, then pull C to take out the ribbon cassette.
6. Take the new ribbon cassette and turn the xxxx in the same direction as shown by the arrow near the xxxx to tighten the ribbon. Do not turn the xxxx in the opposite direction.
7. Make sure the ribbon is positioned between the print head (E) and the ribbon mask (F).
8. Push the ribbon cassette until it snaps into the clasps on both sides.
9. Turn the xxxx of the ribbon cassette in the direction of the arrow to tighten the ribbon.
For visual reference, you can refer to the "Installing the ribbon cassette" section in the Tera Electronic Time Clock Operation Manual, which provides illustrations and additional details.
If you have any further questions or need assistance, please feel free to contact Tera's official customer service via email at info@tera-digital.com or through their provided contact numbers.
Add New Comment