Answer
Nov 03, 2024 - 09:47 PM
Here are the step-by-step instructions for installing the Tera Q8 Home EV Wall Charger:
1. Fix the U screws and mounting plate to the wall.
2. Place the charging station onto the mounting plate attached to the wall.
3. Assemble the anti-theft xxxx on the side.
To wire the power for Level 1 charging:
1. If a power distribution box is being used, make sure to connect the L (Line), N (Neutral), and PE (Protective Earth) ends of the input cable of the plug to the corresponding L, N, and PE ends of the circuit breaker respectively.
To wire the power for Level 2 charging:
1. If a power distribution box is being used, make sure to connect the L1, L2 (Line 1 and Line 2), and PE (Protective Earth) ends of the input cable of the plug to the corresponding L1, L2, and PE ends of the circuit breaker respectively.
Please note that the installation of the Tera Q8 charger should be done by a certified electrician or a professional installer to ensure safety and compliance with local regulations. It is important to follow the installation instructions provided in the user manual for proper installation.
For more detailed information and illustrations, please refer to the Tera Q8 Home EV Wall Charger User Manual.
Add New Comment