User Manual Q&AAnswer
Nov 03, 2024 - 09:39 PM
Setting up the Zooblu WiFi Extender Signal Booster is a straightforward process. Here are the step-by-step instructions:
1. Placement: Plug the extender into an electrical outlet located halfway between your router and the desired coverage area. This ensures optimal signal strength.
2. Connection: There are two methods to connect the extender to your WiFi network:
a. WPS Button: Press the WPS button on your router and then press the WPS button on the extender within 2 minutes. The extender will automatically connect to your WiFi network.
b. Web Setup Portal: Connect your computer or mobile device to the extender's WiFi network (default SSID and password can be found in the user manual). Open a web browser and enter "http://ap.setup" or "http://192.168.10.1" in the address bar. Follow the on-screen instructions to connect the extender to your WiFi network.
3. Configuration: Once the extender is connected to your WiFi network, follow the intuitive on-screen prompts to complete the configuration process. You may need to enter your WiFi network's password during this step.
4. Positioning: If necessary, adjust the extender's location for optimal coverage. Use the signal strength indicators on the extender to find the best placement. The goal is to have a strong and stable WiFi signal in the desired coverage area.
By following these steps, you should be able to successfully set up your Zooblu WiFi Extender Signal Booster. If you encounter any issues or have further questions, refer to the user manual for troubleshooting guidance or contact Zooblu customer support for assistance.
Add New Comment