User Manual Q&AAnswer
Nov 03, 2024 - 09:37 PM
To attach the attachments to the Datavac Electric Duster, follow these steps:
1. Plug the power unit into a standard wall outlet.
2. Identify the Blower Port on the unit.
3. If you want to use the Blower Nozzle, depress the Push Button located on the Blower Port and firmly push on the Blower Nozzle in a clockwise turning motion until it is securely attached.
4. If you prefer to use the Air Flare, follow the same process as above but attach the Air Flare instead of the Blower Nozzle.
5. For more precise cleaning, you can attach the Micro Cleaning Tool Kit Adaptor to the Blower Port first.
6. Once the Micro Cleaning Tool Kit Adaptor is attached, you can then attach the Flex Neck Extension Wand to the adaptor.
7. Finally, you can attach either the Micro Dusting Brush or the Micro Crevice Tool to the Flex Neck Extension Wand, depending on your cleaning needs.
Remember to press the On/Off Switch to turn the unit on and off. It is normal for the unit to get warm to the touch if used with attachments for an extended length of time.
For further information or troubleshooting, please refer to the instruction manual provided with the Datavac Electric Duster.
Add New Comment