User Manual Q&AAnswer
Nov 03, 2024 - 09:35 PM
Setting up the Kalff WiFi Extender Signal Range Booster is a straightforward process. Here are the step-by-step instructions:
1. Plug in the extender: Connect the extender to a power outlet near your existing WiFi router or gateway.
2. Wait for the extender to power on: Give the extender about 30 seconds to power on and initialize.
3. Connect to the extender: On your computer or mobile device, go to the WiFi settings and scan for available networks. Look for the network name (SSID) of the extender, which is usually labeled as "Kalff_Extender" or something similar.
4. Connect to the extender's network: Select the extender's network from the list of available networks and enter the password if prompted. The default password can usually be found on a sticker on the extender or in the user manual.
5. Configure the extender: Once connected to the extender's network, open a web browser and enter "http://192.168.10.1" or "http://ap.setup" in the address bar. This will take you to the extender's configuration page.
6. Follow the setup wizard: The setup wizard will guide you through the configuration process. You may need to select your existing WiFi network from a list and enter the password to connect the extender to your network.
7. Set up the SSID and password: During the setup process, you will have the option to change the extender's network name (SSID) and password. You can choose to keep them the same as your existing network or create a new one.
8. Complete the setup: Once you have finished configuring the extender, click on the "Finish" or "Save" button to apply the settings. The extender will then restart and connect to your existing WiFi network.
After the setup is complete, you can place the extender in a location where it can effectively extend the WiFi signal to areas with weak or no coverage. Remember to keep the extender away from direct sunlight or heat sources and avoid placing it near other electronic devices that may cause signal interference.
If you encounter any issues during the setup process or need further assistance, refer to the user manual included with the product or contact Kalff customer support for additional help.
Add New Comment