Answer
Nov 03, 2024 - 09:22 PM
To load paper into the Victor 1460-4 calculator, please follow these steps:
1. Set the "NP/P/IP" switch to the NP position.
2. Place the paper holders into position.
3. Install the paper roll on the holders.
4. Insert the paper end into the printer slot.
5. Press the [ ] key to feed the paper to an adequate length.
For a visual reference, please refer to Figure 3 and Figure 4 in the instruction manual provided. These figures illustrate the paper loading process.
It's important to note that the printing paper should have a width of 57mm and a maximum diameter of 80mm. Make sure to follow these specifications to ensure proper paper loading and printing functionality.
If you have any further questions or need additional assistance, please refer to the instruction manual provided or contact the Victor customer support team.
Add New Comment