Answer
Nov 03, 2024 - 08:47 PM
To connect the MORRFlate MF-PSIPRO-5-L TenSix PSI Pro Portable Compressor to your vehicle's battery, follow these steps:
1. Ensure the vehicle or device you're inflating is on a stable surface.
2. Before connecting, make sure the compressor is turned off.
3. Check the voltage requirement for the compressor to ensure compatibility with your power source.
4. Connect the compressor to a 12V power source, typically your vehicle's battery. The red cable is positive (+), and the black cable is negative (-).
5. Attach the red cable's alligator clip to the positive terminal of the battery and the black cable's alligator clip to the negative terminal of the battery.
6. Ensure the connections are secure and that the clips are tightly attached to the battery terminals.
7. Once the connections are secure, you can proceed with using the compressor for inflation.
Please refer to the user manual for any specific instructions or diagrams related to connecting the compressor to your vehicle's battery. It is essential to follow the manual's guidelines to ensure safe and proper usage of the compressor.
Add New Comment