Answer
Nov 03, 2024 - 08:45 PM
To switch between AC (Alternating Current) and DC (Direct Current) power sources on the Wagan EL7316 AC/DC Tire Inflator, follow these steps:
1. Locate the AC/DC switch on the inflator. It is typically located on the side or back of the unit.
2. If you want to use the inflator with an AC power source (such as a wall outlet), ensure that the switch is set to the AC position.
3. If you want to use the inflator with a DC power source (such as a car's accessory port), ensure that the switch is set to the DC position.
4. Once you have selected the desired power source, connect the appropriate power cord to the inflator. The AC power cord should be plugged into a standard wall outlet, while the DC power cord should be plugged into the car's accessory port (cigarette lighter port).
5. You can now use the inflator with the selected power source to inflate your tires or other inflatable items.
Please refer to the user manual for more detailed instructions and safety guidelines specific to your model of the Wagan EL7316 AC/DC Tire Inflator.
Add New Comment