Answer
Nov 03, 2024 - 08:41 PM
To connect the Fujitsu SP-1425 Color Duplex Scanner to your computer, follow these steps:
1. Make sure your computer is turned on and running.
2. Locate the USB cable that came with the scanner.
3. Connect one end of the USB cable to the USB port on the back of the scanner.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the cable is securely connected, the scanner should be recognized by your computer.
6. Install any necessary drivers or software that may be required for the scanner to function properly. You can refer to the Operator's Guide for instructions on driver installation.
7. Once the drivers and software are installed, you should be able to start using the scanner for scanning documents.
Please note that the Fujitsu SP-1425 Color Duplex Scanner uses USB connectivity technology, so it should be compatible with most computers that have USB ports. If you encounter any issues during the setup process, refer to the Operator's Guide for troubleshooting tips or contact Fujitsu customer support for further assistance.
Add New Comment