Answer
Nov 03, 2024 - 08:26 PM
To set the time and date on the Lathem 800P TruAlign Time Recorder, please follow these steps:
1. Locate the "Set" button on the front panel of the time recorder.
2. Press and hold the "Set" button for a few seconds until the display shows "SET TIME."
3. Use the arrow buttons (usually labeled as "Up" and "Down") to adjust the hour, minute, and AM/PM settings. Press the "Set" button after each adjustment to move to the next setting.
4. Once the time is set, press the "Set" button again to move to the date setting.
5. Use the arrow buttons to adjust the month, day, and year settings. Press the "Set" button after each adjustment to move to the next setting.
6. After setting the date, press the "Set" button one more time to exit the time and date setup mode.
For more detailed instructions and illustrations, please refer to the User's Guide provided with the Lathem 800P TruAlign Time Recorder. You can find the User's Guide in the box or access it online through the provided link.
Add New Comment