User Manual Q&AAnswer
Nov 02, 2024 - 02:32 AM
To load the ink ribbon in the Sharp QS-2770H Electronic Printing Calculator, please follow the steps below:
1. Make sure the calculator is turned off and unplugged from the power source.
2. Open the printer cover by lifting it upwards.
3. Locate the ink ribbon compartment on the right side of the printer.
4. Remove the old ink ribbon cartridge by pulling it straight out.
5. Take the new compatible Victor ink ribbon 7010 cartridge and remove any packaging or protective materials.
6. Insert the new ink ribbon cartridge into the compartment, ensuring that it is securely seated.
7. Close the printer cover by pressing it down until it clicks into place.
8. Plug in the calculator and turn it on.
9. Perform a test print to ensure that the ink ribbon is properly installed and printing correctly.
For more detailed instructions and illustrations, please refer to the "Loading the Ink Ribbon" section in the Sharp QS-2770H Electronic Printing Calculator Operation Manual provided above.
Add New Comment