Answer
Nov 02, 2024 - 02:09 AM
To program frequencies into the Uniden SR30C Compact Handheld Scanner, please follow these steps:
1. Turn on the scanner by rotating the volume/power xxxx clockwise.
2. Press the "MANUAL" button to enter Manual mode.
3. Use the numeric keypad to enter the channel number you want to program (e.g., 001 for the first channel).
4. Press the "PROGRAM" button. The scanner will display the frequency currently assigned to the selected channel.
5. Use the numeric keypad to enter the desired frequency. For example, if you want to program a frequency of 154.920 MHz, you would enter 1-5-4-9-2-0 followed by the "ENTER" button.
6. The scanner will display the programmed frequency. If you want to assign a custom name to the channel, press the "TEXT" button and use the numeric keypad to enter the desired name. Press "ENTER" to save the name.
7. Press the "PROGRAM" button again to move to the next channel you want to program.
8. Repeat steps 3 to 7 for each channel you want to program.
9. Once you have programmed all the desired frequencies, press the "SCAN" button to start scanning through the programmed channels.
For more detailed instructions and additional programming options, please refer to the Uniden SR30C 500-Channel Compact Handheld Scanner Owner's Manual provided above.
Add New Comment