Answer
Nov 02, 2024 - 01:31 AM
To connect the Volcora V-LHHBS-A1 Bluetooth Barcode Scanner to your device, follow these steps:
1. Power On: Activate the scanner by holding down the power button until you hear a beep or see the LED indicator illuminate.
2. Pairing: Enable Bluetooth on your device and search for available devices. Select the scanner to establish a connection.
3. Scanning: Point the scanner at the barcode and press the trigger button or utilize auto-scan mode to capture barcode data.
4. Data Transmission: If using offline mode, make sure to connect the scanner to your device to transmit stored data.
5. Charging: Recharge the scanner's battery as necessary using the provided USB cable and power source.
6. Data Retrieval: Retrieve scanned data from the device to which the scanner is connected for processing or storage.
7. Customizing Settings: Adjust scanner settings to match your specific requirements, such as scanning modes and configurations.
For more detailed instructions, please refer to the user manual provided with the Volcora V-LHHBS-A1 Bluetooth Barcode Scanner.
Add New Comment