User Manual Q&AAnswer
Nov 02, 2024 - 01:10 AM
To connect the RoadKing RK56B Noise Canceling CB Microphone to your CB radio, follow these steps:
1. Locate the microphone input on your CB radio. It is usually located on the front or side of the radio and is labeled "MIC" or "Microphone."
2. Take the coiled cord of the RK56B microphone and plug the 4-pin connector into the microphone input on your CB radio. Make sure the connector is inserted securely.
3. Once the microphone is connected, you can adjust the position of the microphone for comfortable use.
4. To use the microphone, press and hold the push-to-talk (PTT) switch located on the side of the microphone. This will activate the microphone circuit and allow you to transmit your voice. Release the switch to mute the microphone and listen to incoming transmissions.
Please refer to the user manual that came with your RK56B microphone for any specific instructions or additional setup information. If you encounter any difficulties, you can also contact RoadKing customer support or consult authorized service centers for further assistance.
Add New Comment