User Manual Q&AAnswer
Nov 02, 2024 - 01:05 AM
To adjust the squelch levels on the Uniden PC68LTX CB Radio, follow these steps:
1. Locate the "Dynamic Squelch Control" feature on the CB radio. It is usually a xxxx or button labeled "Squelch" or "SQ".
2. Turn on the CB radio and ensure it is set to a channel with activity.
3. Start with the squelch control set to the default position (usually fully counterclockwise).
4. Gradually turn the squelch control clockwise until the background noise disappears. This will vary depending on the level of interference in your specific environment.
5. If you turn the squelch control too far clockwise, you may start to cut off weaker signals. Find the right balance where the background noise is minimized while still allowing for clear communication.
For more detailed instructions and illustrations, please refer to the "Dynamic Squelch Control" section in the Uniden PC68LTX CB Radio Owner's Manual.
Add New Comment