User Manual Q&AAnswer
Nov 02, 2024 - 12:56 AM
To pair the camera with the monitor on the Whistler WBU-800 Wireless Digital Backup Camera, follow these steps:
1. Turn off the camera using the switch on the back of the camera (if it is already mounted on the vehicle, skip this step).
2. Power on the monitor.
3. Press the power button to place the cursor over "SETUP" on the menu, then press the power button to select it.
4. With the "PAIR" icon selected, press the power button to start the pairing process.
5. If your model is equipped with two cameras, select the camera you want to pair (Camera 1 is the rear camera, Camera 2 is the front camera).
6. Turn the camera back on using the switch on the back of the camera. If the camera is mounted to your vehicle, use the pairing tool (included in the package) to press and release the pair button located above the Micro USB charge port.
7. The monitor will display "Pair OK" when the pairing process is completed.
Once the camera and monitor are paired, you should be able to see the camera's video feed on the monitor. If you encounter any issues during the pairing process, refer to the troubleshooting section of the user guide or contact Whistler customer service for further assistance.
Add New Comment