Answer
Nov 02, 2024 - 12:42 AM
To load the ribbon cartridge in the Sharp QS-2760H Ribbon Printing Calculator, follow these steps:
1. Make sure the calculator is turned off.
2. Open the printer cover by lifting it upwards.
3. Locate the ribbon cartridge holder inside the printer compartment.
4. Remove the protective tape from the new ribbon cartridge.
5. Insert the ribbon cartridge into the cartridge holder, ensuring that the ribbon is positioned correctly and the ribbon feed xxxx is facing towards the front of the calculator.
6. Press down firmly on the cartridge until it clicks into place.
7. Close the printer cover.
For more detailed instructions and illustrations, please refer to the "Loading the Ribbon Cartridge" section in the Sharp QS-2760H Ribbon Printing Calculator Operation Manual.
Add New Comment