User Manual Q&AAnswer
Nov 01, 2024 - 11:39 PM
To pair the Honeywell 1202G Single-Line Laser Barcode Scanner with your device, please follow these steps:
1. Ensure that the scanner is charged or connected to a power source.
2. Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
3. On your device (laptop, desktop, or smartphone), enable Bluetooth if it is not already enabled.
4. Open the Bluetooth settings on your device and search for available devices.
5. On the scanner, press and hold the Bluetooth button until the LED indicator starts to blink, indicating that it is in pairing mode.
6. In the Bluetooth settings on your device, you should see the scanner listed as a discoverable device. Select the scanner from the list.
7. If prompted, enter the PIN code for the scanner. The default PIN code is usually "0000" or "1234". Refer to the user's guide for the specific PIN code for your scanner model.
8. Once the pairing is successful, the LED indicator on the scanner will stop blinking and remain solid.
9. Test the connection by opening a barcode scanning application or software on your device and scan a barcode. The scanned data should be displayed on your device.
Please note that the pairing process may vary slightly depending on the device and operating system you are using. For more detailed instructions and troubleshooting tips, refer to the user's guide provided with the scanner.
Add New Comment