How do I set up the Pyramid 5000 Auto Totaling Time Clock? (Pyramid 5000 Auto Totaling Time Clock User Guide)

Answer

manuals.plus

Nov 01, 2024 - 10:55 PM


To set up the Pyramid 5000 Auto Totaling Time Clock, follow these steps:

1. Desktop Setup:
   - Remove the time clock from the carton and place it on a flat, level surface.
   - Plug the unit into an AC wall outlet.

2. Wall Mounting:
   - Select a location convenient for employees to clock in and out.
   - Use masking tape to hold the mounting template on the wall, positioning it so the bottom of the time clock is approximately 45 inches from the floor.
   - Drill holes using the template as a guide and install screws.
   - Hang the time clock on the wall, aligning the keyholes on the rear with the  xxxx  heads. Press downward on the time clock until it lowers onto the screws.
   - Plug the unit into an AC wall outlet.

3. Programming:
   - Use the key to unlock and remove the top/front cover of the time clock.
   - Locate the programming buttons labeled SELECT, (UP), and (DOWN).
   - Press SELECT until the desired feature is displayed.
   - Use the (UP) or (DOWN) buttons to scroll through feature options.
   - Press SELECT to save the option setting and move to the next feature.

4. Set Up Pay:
   - Use the SETUP PAY? feature to select the desired pay period (weekly, every 2 weeks, semi-monthly, or monthly).
   - Note that selecting "YES" in the SETUP PAY? menu after the initial setup will erase all stored data, and new time cards must be issued.

For more detailed instructions and information on other features of the Pyramid 5000 Auto Totaling Time Clock, please refer to the User Guide provided with the product.