User Manual Q&AAnswer
Nov 01, 2024 - 10:12 PM
To pair the remote control with the LoraTap SS001KS plug adapter, follow these steps:
1. Plug the LoraTap SS001KS plug adapter into a power outlet.
2. Ensure that the device you want to control is not plugged into the adapter at this time.
3. Press and hold the "ON" button on the remote control for about 5 seconds until the LED indicator on the remote starts flashing rapidly.
4. While the LED indicator is flashing, quickly plug the device you want to control into the LoraTap SS001KS plug adapter.
5. Release the "ON" button on the remote control.
6. The LED indicator on the remote control should stop flashing and remain lit, indicating that the pairing process is complete.
Please note that the pairing process may vary slightly depending on the specific model of the LoraTap SS001KS plug adapter. If you encounter any difficulties or the above steps do not work, refer to the user manual or contact LoraTap customer support for further assistance.
Add New Comment