User Manual Q&AAnswer
Nov 01, 2024 - 09:53 PM
To connect the Royal Sovereign RTP-2 Thermal Printer Coin Sorter to your coin sorter, follow these steps:
1. Ensure both the printer and the coin sorter are powered off.
2. Locate the USB cable included with the printer.
3. Connect one end of the USB cable to the USB port on the back of the coin sorter.
4. Connect the other end of the USB cable to the USB port on the back of the printer.
5. Power on both the printer and the coin sorter.
6. Wait for the devices to establish a connection. This may take a few moments.
7. Once the connection is established, you can start using the printer to print reports and receipts directly from the coin sorter.
Please refer to the user manual for further details and troubleshooting steps if you encounter any issues during the connection process.
Add New Comment