Answer
Nov 01, 2024 - 09:32 PM
To adjust the feeding gap on the Cassida Tiger UV Digital Bill Counter, follow these steps:
1. Turn off the machine and make sure it is unplugged.
2. Locate the "Feeding gap adjustment xxxx " on the rear of the machine (refer to section 1.3 Rear and front view in the manual).
3. Using a suitable tool, such as a screwdriver, turn the adjustment xxxx clockwise to narrow the feeding gap.
4. Test the machine by counting a small number of bills to ensure they are properly fed and counted.
5. If the bills are still not being fed correctly, repeat steps 2-4, adjusting the feeding gap slightly each time until the desired feeding performance is achieved.
Note: It is important to be cautious when adjusting the feeding gap and to make small adjustments at a time. If you are unsure or experience any difficulties, it is recommended to contact the manufacturer's technical support for further assistance.
Add New Comment