Answer
Nov 01, 2024 - 09:14 PM
To clean and maintain the Cassida 7750R Reader Bill Counter, follow these recommended procedures:
1. Cleaning:
- Ensure the machine is turned off and disconnected from the power source before cleaning.
- Use a soft, lint-free cloth and a mild cleaning solution to wipe the exterior surfaces of the device. Avoid using abrasive materials or excessive moisture.
- Pay special attention to the hopper and stacker sensors. Clean them with the provided soft bristle brush or a dry cloth frequently to remove any dust or debris.
- Clean the contact image sensor (CIS) line with the provided soft bristle brush or a dry cloth to ensure accurate bill recognition.
- If necessary, the rubber rollers may be cleaned with a slightly damp cloth. You may use a small amount of isopropyl alcohol to dampen the cloth and clean the rollers. Wait until the rollers are completely dry before turning on the machine.
2. Maintenance:
- Perform weekly maintenance on the unit to maintain top performance.
- Regularly check for any metal clips, staples, or rubber bands in the bills being counted. Remove them to avoid jams and ensure proper operation.
- Follow the proper procedure for loading the hopper to avoid jams and ensure smooth bill feeding. Refer to section 2.2 "LOADING THE HOPPER" in the user manual for detailed instructions.
- Periodically check and adjust the feed gap if necessary. The feed gap adjustment ensures proper bill feeding and prevents errors. Refer to section 6.2 "FEED GAP ADJUSTMENT" in the user manual for instructions.
- If the sensor's sensitivity decreases over time, causing ID errors, perform the calibration procedure to recalibrate the contact image sensor (CIS). Refer to section 6.3 "CALIBRATION" in the user manual for instructions.
By following these cleaning and maintenance procedures, you can ensure the optimal performance and longevity of your Cassida 7750R Reader Bill Counter. For more information and troubleshooting, refer to the user manual provided.
Add New Comment