Answer
Nov 01, 2024 - 04:55 AM
To replace the UV lamp in the Safescan 50 UV Counterfeit Bill Detector, follow these steps:
1. Unplug the device from the power socket.
2. Hold the device in your hand with the socket of the lamp facing upwards.
3. Take the UV lamp removal tool from the bottom of the device.
4. Place the hook between the two tubes of the lamp and gently, but firmly, pull the lamp from the socket.
5. Carefully remove the old lamp from the device.
6. Turn the device with the lamp socket facing downwards.
7. Gently position the new lamp into the socket and press until it locks into place with a click.
Please refer to the user manual for visual instructions and additional details on lamp replacement.
Add New Comment