User Manual Q&AAnswer
Nov 01, 2024 - 04:37 AM
Cleaning the sensors of the RBC-ES250 Money Counting Machine is an important maintenance task to ensure accurate counting and detection. Here's how you can clean the sensors:
1. Turn off the power switch and disconnect the power cord from the machine.
2. Use a soft brush to gently clean all the sensors in the machine. Pay special attention to the light transmitter and the light-receiving sensors to avoid any paper particles or dust from sticking to them.
3. If necessary, you can wipe the glass surfaces of the detectors with a soft cloth dampened with alcohol.
4. For optimal cleaning results, Royal Sovereign recommends using their Cleaning Cards (RBC-CLN). With the machine on, run the cleaning card through the machine like a bill. This will clean the sensors of dirt and other contaminants. It is recommended to use the cleaning card after every 100 cycles.
Remember to always follow the safety instructions provided in the owner's manual and ensure that the machine is unplugged before cleaning.
Add New Comment