User Manual Q&AAnswer
Nov 01, 2024 - 04:35 AM
To set the welding mode and power on the VEVOR PL-80M Stud Welder Dent Repair, follow these steps:
1. Select the appropriate welding mode based on the characteristics of the dent you are repairing. The PL-80M offers 6 functional modes - Round Gasket, OT Gasket, Wave Line, Hot Press Flattening, Carbon Rod, and Spot Welding Slide Hammer. Choose the mode that best suits your repair needs.
2. Once you have selected the welding mode, set the desired power level for the welder. The PL-80M has a rated power of 3000W, and the power can be adjusted to suit the thickness and material of the dent you are working on.
3. Thoroughly clean the surface of the sheet metal where the dent is located. This will ensure strong welds and optimal repair results.
4. Position the welder's electrode on the dent, ensuring proper contact with the metal surface.
5. Initiate the welding process, and the machine will automatically determine the optimal timing and apply pressure for seamless and efficient welding.
6. It is important to observe proper safety measures while operating the welder, such as wearing appropriate safety gear and ensuring proper ventilation.
7. Continue the welding process until the dent is satisfactorily repaired.
8. After each welding task, allow the machine to cool down to prevent overheating.
Please refer to the user manual for more detailed instructions and safety guidelines specific to the VEVOR PL-80M Stud Welder Dent Repair.
Add New Comment