User Manual Q&AAnswer
Nov 01, 2024 - 03:53 AM
To set the tumbling cycles on the VEVOR KD-C1011 Rock Tumbler, please follow the instructions provided in the user manual. The manual provides a table with the recommended stages, emery grit, ceramic abrasive, speed, and time for each stage of the tumbling cycle. Generally, a rough polish requires a faster speed, while a fine polish requires a slower speed.
Here is a summary of the recommended tumbling cycles:
1. Stage 1: Add 320# emery grit and ceramic abrasive with the 4th speed for 4 days.
2. Stage 2: Add 600# emery grit and ceramic abrasive with the 3rd speed for 3 days.
3. Stage 3: Add 800# emery grit and ceramic abrasive with the 2nd speed for 2 days.
4. Stage 4: Add brightening powder and ceramic abrasive with the 1st speed for 1 day.
Please note that these are general guidelines, and you can adjust the duration and speed based on your preferences and the desired polish effect. Make sure to add the proper amount of water for each stage as well.
For more detailed information, please refer to the Tumbling Cycles Guide provided in the user manual.
Add New Comment