Answer
Nov 01, 2024 - 03:35 AM
To install the VEVOR DL-620 Retractable Extension Cord Reel, please follow these steps:
1. Check the wall or ceiling surface where you will mount the reel to ensure it is sturdy enough to support the weight of the reel and the additional force when pulling on the power cord.
2. Locate a wall or ceiling beam that can support the weight of the cord reel. If necessary, use a stud finder to locate a suitable mounting location.
3. Fix the separate bracket to the wall or ceiling beam using cement screws or wood screws, depending on the surface material. Ensure the bracket is securely attached.
4. Slide the mounting bracket of the cord reel into the separate bracket and fix the set xxxx to secure it in place. Pay attention to the position of the set xxxx to prevent the cord reel from falling off.
5. Adjust the cord stopper to a suitable position if needed.
Please refer to Figure 1 and Figure 2 in the user manual for visual guidance on the installation process.
Note: The user manual recommends installing the cord reel within 4 feet of an electrical outlet, preferably the outlet for a garage door opener. It also advises against using drywall alone to support the weight of the cord reel.
For further assistance or clarification, you can contact VEVOR customer service at CustomerService@vevor.com.
Add New Comment