Answer
Nov 01, 2024 - 03:12 AM
To install the ELEGRP R1815D60AAC-WH USB Outlet Receptacle, please follow these step-by-step instructions:
1. Turn off power to the outlet at the circuit breaker. This is crucial for your safety during the installation process.
2. Remove the existing outlet and disconnect the wires. Carefully unscrew the outlet from the electrical box and disconnect the wires attached to it. Take note of the wire connections for reference during the installation of the new receptacle.
3. Connect the wires to the new USB outlet receptacle as per the wiring diagram provided in the user manual. The manual should have clear instructions on how to connect the live, neutral, and ground wires to the corresponding terminals on the receptacle. Make sure to tighten the wire connections securely.
4. Secure the receptacle to the electrical box with the provided screws. Align the receptacle with the xxxx holes on the electrical box and use the screws provided to secure it in place. Ensure that the receptacle is flush against the wall.
5. Attach the wall plate if it is included with the product. The wall plate should align with the receptacle and cover it completely. Use the screws provided to attach the wall plate securely.
6. Turn the power back on at the circuit breaker and test both the USB and AC outlets with appropriate devices. Plug in a device to the AC outlet and connect a USB device to the USB ports to ensure they are functioning correctly.
Please note that these instructions are a general guide, and it's important to refer to the specific user manual provided with your ELEGRP R1815D60AAC-WH USB Outlet Receptacle for detailed installation instructions and any additional safety precautions. If you are unsure or uncomfortable with the installation process, it is recommended to consult a qualified electrician for assistance.
Add New Comment