User Manual Q&AAnswer
Nov 01, 2024 - 02:53 AM
To pair the remote control with the Zoiinet Remote Control Outlet Plug Switch, please follow these steps:
1. Plug in the outlet plugs: Insert the Zoiinet outlet plugs into your existing wall outlets.
2. Prepare the remote control: Ensure that the remote control has batteries installed and that they are correctly inserted. Refer to the user manual for the specific battery type and orientation.
3. Pair the remote control with the outlet plugs: Press and hold the "Pair" or "Sync" button on the remote control for a few seconds until the LED indicator starts flashing.
4. Activate pairing mode on the outlet plugs: Press and hold the "Pair" or "Sync" button on the outlet plug for a few seconds until the LED indicator starts flashing.
5. Wait for pairing confirmation: The LED indicators on both the remote control and the outlet plug should stop flashing and remain solid, indicating successful pairing.
6. Test the remote control: Use the remote control to turn the connected devices on or off. Ensure that the remote control commands are correctly received by the outlet plug.
Note: The pairing process may vary slightly depending on the specific model of the Zoiinet Remote Control Outlet Plug Switch. For detailed instructions, please refer to the user manual provided with the product.
If you encounter any issues during the pairing process, please consult the troubleshooting section of the user manual or contact Zoiinet customer support for further assistance.
Add New Comment