Answer
Nov 01, 2024 - 02:52 AM
I just purchased the Fosmon C-10785US Wireless Remote Control Electrical Outlet Switch and I'm not sure how to pair the remote control with the outlets. Can you provide step-by-step instructions?
Answer: To pair the remote control with the Fosmon C-10785US Wireless Remote Control Electrical Outlet Switch, follow these steps:
1. Make sure the outlets are plugged into standard Type B (NEMA 5-15) electrical outlets and your devices are plugged into the outlets.
2. Ensure that the batteries in the remote control are properly inserted and working.
3. Stand within the specified remote control range, which is typically up to 100 feet (30 meters).
4. Press and hold the desired outlet button on the remote control for a few seconds until the corresponding outlet turns on or off. Repeat this step for each outlet you want to pair.
5. Once paired, you can use the remote control to turn the outlets on or off from a distance.
Note: If you encounter any issues with pairing, refer to the user manual for specific instructions on resetting and re-pairing the remote control and outlets. Additionally, make sure there are no physical obstructions or interference that may affect the wireless signal between the remote control and the outlets.
Add New Comment