User Manual Q&AAnswer
Nov 01, 2024 - 02:49 AM
Installing the ELEGRP AUR01-1542AAC-WH USB Wall Outlets Receptacles is a relatively straightforward process. Here are the step-by-step instructions:
1. Safety First: Before starting the installation, ensure that the power to the electrical circuit is turned off at the electrical panel. This step is crucial to prevent any electrical accidents or injuries.
2. Remove Existing Outlet Cover: Use a screwdriver to remove the screws holding the existing outlet cover in place. Carefully detach the cover from the wall.
3. Disconnect Wires: Once the outlet cover is removed, you will see the wiring connections. Take note of the wire colors and their corresponding positions (e.g., black for hot, white for neutral, green or bare copper for ground).
4. Turn Off Power: Double-check that the power to the circuit is turned off at the electrical panel before proceeding. This step ensures your safety during the installation process.
5. Attach Wires to New Receptacle: Take the ELEGRP AUR01-1542AAC-WH USB Wall Outlet Receptacle and identify the hot (black), neutral (white), and ground (green or bare copper) terminals. Connect the corresponding wires from your electrical box to the appropriate terminals on the receptacle. Use wire nuts to secure the connections.
6. Mount the Receptacle: Carefully insert the wired receptacle into the electrical box, ensuring that the wires are neatly tucked inside. Use the provided mounting screws to secure the receptacle to the electrical box.
7. Install the Faceplate: Once the receptacle is securely mounted, attach the faceplate provided with the ELEGRP AUR01-1542AAC-WH USB Wall Outlet Receptacle. Align the xxxx holes on the faceplate with the receptacle and use the screws to fasten it in place.
8. Restore Power: After confirming that all connections are secure and the faceplate is properly installed, you can turn the power back on at the electrical panel.
9. Test the Receptacle: Once the power is restored, test the receptacle by plugging in a device or using a voltage tester to ensure it is functioning correctly.
Please note that these instructions provide a general overview of the installation process. It is essential to consult the user manual and follow the specific instructions provided by the manufacturer for your ELEGRP AUR01-1542AAC-WH USB Wall Outlets Receptacles model
Add New Comment