User Manual Q&AAnswer
Nov 01, 2024 - 02:46 AM
To pair the remote control with the receivers for the HAPYTHDA RCO-CK1 Wireless Remote Control Light Switches, please follow these steps:
1. Make sure the receivers are properly installed and connected to the electrical circuit.
2. Ensure that the remote control has working batteries.
3. Locate the pairing button on the receivers. This button is usually located on the side or bottom of the receiver.
4. Press and hold the pairing button on one of the receivers until the LED indicator starts flashing rapidly.
5. While the LED indicator is flashing, press and hold the "Pair" or "Sync" button on the remote control. Hold the button until the LED indicator on the receiver stops flashing and remains solid.
6. Release both buttons.
7. Repeat the pairing process for any additional receivers you want to pair with the remote control.
8. Once the pairing is complete, test the remote control by pressing the buttons to turn the lights on/off or adjust the brightness.
Note: If you encounter any issues during the pairing process, refer to the user manual for specific instructions or troubleshooting guidelines.
Add New Comment