User Manual Q&AAnswer
Nov 01, 2024 - 02:44 AM
To pair the ELECTOP H-009 remote control with the outlets, please follow these steps:
1. Plug the wireless outlet into a wall socket.
2. Make sure the outlets are within the operational range of the remote control (usually mentioned in the product specifications).
3. On the remote control, locate the pairing button or a button with a pairing symbol (usually indicated by two arrows forming a circle).
4. Press and hold the pairing button on the remote control for a few seconds until the LED indicator on the remote control starts flashing.
5. While the LED indicator is flashing, press and hold the power button on the wireless outlet for a few seconds until the LED indicator on the outlet starts flashing.
6. Release both buttons and wait for a few seconds. The LED indicators on both the remote control and the outlet should stop flashing and remain solid, indicating successful pairing.
7. Repeat the pairing process for additional outlets if needed.
Note: The specific pairing process may vary slightly depending on the model of the ELECTOP H-009. Please refer to the user manual provided with your product for detailed instructions and any additional steps specific to your model.
If you encounter any difficulties during the pairing process, refer to the troubleshooting section in the user manual or contact the manufacturer's technical support for further assistance.
Add New Comment